Light Emitting Plugs

Light Emitting Plugs

 

Flat socket with cable for solenoid valve pin connectors with integrated LED and transient surge protection (optional).

 

Information.jpg

Application

The Light Emitting Plug is used instead of a standard connector for connecting electrical components.

Schild.jpg

Sealing

Our Light Emitting Plugs are made of macromelt, a renewable and biodegradable resource. It provides protection against environmental influences and a water-tight connection.

 

LED.jpg

Emitting

The LEDs indicate not only the switching state of the solenoid coil. They can also signal voltage peaks which may appear with it's variable luminance.

Flash.jpg

Protecting (optional)

After switching off the Plug limits the generated induction voltage.

 

Technical data

Housing and sealing material Macromelt (PA-Base) Color Amber transparent
Contact material CuSn6 Surface Gal Sn
Mounting Screw M3x16, captive Tightening torque max. 0,6 Nm
Degree of protection (EN 60529) IP65 (installed) Ambient temperature -20°C to +80°C (-4°F to 176°F)
Other features - Produced without LABS ingredients
- free of silicone
- resistant against industrial environment
- EMV-resistant
Light Emitting Plugs
Light Emitting Plugs